一体光纤端面检测仪

1.   RBTX400G型光纤端面检测仪配置有高稳定图像监控器（显示屏 10’’）。
2.  专门用来检测多路光纤连接器端面研磨质量，清洁度或使用过
     程中产生的各种缺陷。特别适用于MTRJ，MPO，FC, APC,等多
     芯和8度APC光纤跳线检测。
3.  可用于检测普通单模(SM)，多模(MM)光纤连接器，保偏
    （PM)光纤连接器和其他特种光纤连接器。
4.  可检测的连接器接头型号包括：FC/PC, FC/APC, SC/PC, 
     SC/APC, ST/APC, LC/PC, LC/APC, MU, MTRJ，MPO,FA,等。
5.  仪器高度清晰，放大倍速可达400倍。

6.  具有拍照储存功能，保留资料更方便。 

1.    RB-400Gmicroscope is used with 10" monitor.2. It is used to detect the 
      defects of fiber optical connector end surface after polished or during  
      the fiber usage, especially proper for detecting of MTRJ, MPO, and FC 
      both in PC or APC connectors.
3.   It can check SM, MM fiber optical connectors, PM fiber optical 
      connectors.
4.   Connectors proper for checking: FC/PC, FC/APC, SC/PC, SC/APC, 
      ST/APC, LC/PC, LC/APC, MU, MTRJ etc.
5.   Monitor is high definition of image. Showing enlarged 400 times, 200 
      times or 80 times. 
6.   The store has a camera function, data retention easier.

电源电压：DC12V                                      

放大倍数：400倍                              

辅助光源：蓝光                                

辅助显示：10英寸                              

总质量：4Kg                                                  

操作方式：手动

Electricity: DC12V                                     

Times enlarged：400 times                           

Light source: Blue light                                             

Monitor size: 10’’                              

Total weight: 4Kg                                           

Operating: Manual